How To Make a Magnetic Galvanized Steel Dry Erase Board?

To make a magnetic galvanized steel dry erase board, you will need the following materials and tools:

magnetic whiteboard front
Materials:
Galvanized steel sheet (cut to desired size)
Plywood or MDF board (cut to match the size of the galvanized steel sheet)
Dry erase paint or dry erase sheets
Magnetic adhesive or magnetic sheets
Adhesive or screws
magnetic whiteboard back

Tools:
Measuring tape
Saw (if cutting the sheet and board to size)
Sandpaper
Paintbrush or roller (if using dry erase paint)
Screwdriver (if using screws for installation)
Utility knife (if using magnetic sheets)

Here’s a step-by-step guide to making the magnetic galvanized steel dry erase board:

Measure and cut the galvanized steel sheet and plywood or MDF board to the desired size. For safety, wear gloves while handling the galvanized steel sheet as its edges can be sharp.
Use sandpaper to smooth the edges of the galvanized steel sheet to prevent any potential injuries.
If using dry erase paint, follow the instructions on the paint can and apply the dry erase paint onto the plywood or MDF board. Allow it to dry completely.
If using dry erase sheets, peel off the backing and carefully adhere the dry erase sheets onto the plywood or MDF board. Smooth out any air bubbles or wrinkles.
Apply adhesive onto the back of the galvanized steel sheet or use screws to attach it to the painted or coated side of the plywood or MDF board. Make sure it is securely attached.
If using magnetic adhesive, apply it directly onto the galvanized steel sheet. If using magnetic sheets, cut them into desired shapes and sizes and adhere them to the back of the galvanized steel sheet using adhesive or a utility knife with a strong blade to cut through both the magnetic sheet and steel sheet.
Allow the adhesive or magnetic sheets to fully bond according to their instructions.
Install the magnetic galvanized steel dry erase board on a wall or surface of your choice. If using screws, drill pilot holes on the board and securely mount it onto the wall.

Once installed, the magnetic galvanized steel dry erase board is ready to use. You can write on it using dry erase markers and attach magnets or other magnetic accessories as needed.

Вернуться к блогу
1 из 4
  • Partner distribution

    20+ Countries

  • Workshop area

    30,300㎡

  • Office area

    2,000㎡

  • Warehouse area

    8,000㎡

  • Equipments

    150+